USB Modules - USBMOD1

USB Module for serial transfers via RS232 or RS422/RS485 to a remote microcontroller or control system. Up to 920k baud is possible with RS232 and 2000k baud for RS422/RS485. Module is mounted in a standard 32 pin DIL package for easy mounting on a pcb or development board. The connection is via a standard USB connector to the PC and drivers are included. Will work with most operating systems, including Windows, Mac and Linux. Easy to program with support for most high level languages including Visual Basic.

Part Code: USBMOD1

Features

• Data transfer rates of up to 920k baud for RS232 and 2000k baud for RS422/RS485
• Drivers Included
• Standard USB Connector
• 32 pin DIL package for easy mounting on a PCB or prototyping board
• Powered from the USB bus, no external supply required

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)

USB module for parallel data transfers between a PC or peripheral, such as a microcontroller, printer, memory device etc. Speeds of up to 1 Mbyte per second are possible. Uses standard transfer protocols and will work with Windows, MAC and Linux operating systems.

Part Code: USBMOD2

Features

• Data transfer rates of up to 1Mbytes per second
• Drivers Included
• Standard USB Connector
• 32 pin DIL package for easy mounting on a PCB or prototyping board
• Powered from the USB bus, no external supply required

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)

USB Module for TTL serial data transfers of up to 1000k baud (RS232) and 3000k (RS422/RS485). The module is a complete plug and play solution and will be recognized directly by your operating system. Module is mounted in a standard 32 pin DIL package for easy mounting on a pcb or development board. The connection is via a standard USB connector to the PC and drivers are included. Will work with most operating systems, including Windows, Mac and Linux. Easy to program with support for most high level languages including Visual Basic.

Part Code: USBMOD3

Features

• Serial Data transfer rates of up to 1000k baud for RS232 and 3000k baud for RS422/RS485
• Drivers Included
• Standard USB Connector
• 32 pin DIL package for easy mounting on a PCB or prototyping board
• Powered from the USB bus, no external supply required

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)

USB Module for fast parallel data transfers to a remote microcontroller or control system. Up to 8 Million bits (1 Megabyte) per second is possible. Module is mounted in a standard 32 pin DIL package for easy mounting on a pcb or development board. The connection is via a standard USB connector to the PC and drivers are included. Will work with most operating systems, including Windows, Mac and Linux. Easy to program with support for most high level languages including Visual Basic.

Part Code: USBMOD4

Features

• Data transfer rates of up to 1 Megabyte per second
• Drivers Included
• Standard USB Connector
• 32 pin DIL package for easy mounting on a PCB or prototyping board
• Powered from the USB bus, no external supply required

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)

Just arrived the new single chip High-Speed Serial UART USB Module based on the FTDI FT232R USB IC. Easily send your data to and from your computer with this module. The module can easily interface with any of our development boards or controllers to give a quick and easy solution for USB connectivity. The unit supports data rates of up to 1 Megabaud with all the necessary USB Protocol handled on the module.

Part Code: USBMOD232

Features

• Data transfer rates of up to 1 Megabyte per second
• Drivers Included
• Standard USB Connector
• 32 pin DIL package for easy mounting on a PCB or prototyping board
• Powered from the USB bus, no external supply required

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)

Just arrived the new single chip High-Speed Serial UART USB Module based on the FTDI FT245R USB IC. Easily send your RS485 data to and from your computer with this module. The module can easily interface with any of our development boards or controllers to give a quick and easy solution for USB connectivity. The unit supports data rates of up to 1 Megabaud with all the necessary USB Protocol handled on the module.

Part Code: USBMOD245

Features

• Data transfer rates of up to 1 Megabyte per second
• Drivers Included
• Standard USB Connector
• 32 pin DIL package for easy mounting on a PCB or prototyping board
• Powered from the USB bus, no external supply required

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)

USB I/O module for connecting up to 24 digital inputs or outputs to the module. Each unit has a unique ID, to allow expansion of up to 128 modules to connect to the one PC. Module can be easily read or written to by using Visual Basic or other high level languages. Ideal as a starting point for a home control or industrial control system.

Part Code: USBMODIO24

Features

• 24 I/O points on a single module
• Uses standard USB connectors
• Powered from the PC, no external supply required
• Standard Header Connectors
• Easy to Set-up and Full Instructions Provided

Technical Data

• Datasheet  
• Dimensions: Length - 42mm, Width - 18mm, Height - 18mm (Excluding Pins)