MAX150 CMOS 8-Bit ADC Datasheet

Buy MAX150

Photograph

Product Details
The MAX150 is a high speed, 8-bit analog to digital converter with a conversion time of 1.34µs. The converter requires only a single +5V power supply and has a 0V to +5V analog input range. The MAX150 includes an on-chip 2.5V reference voltage and has a track-and-hold function for input slew rates up to 100mV/µs. The data output can connect to a microprocessor data bus or connect directly to the microprocessor input port. Features Fast Conversion Time: 1.34µs MAX Built-in Track-and-Hold Function No Adjustment Required No External Clock Single +5V Supply Easy Interface to Microcontrollers Internal 2.5V Reference

Product Details

The MAX150 is a high speed, 8-bit analog to digital converter with a conversion time of 1.34µs. The converter requires only a single +5V power supply and has a 0V to +5V analog input range. The MAX150 includes an on-chip 2.5V reference voltage and has a track-and-hold function for input slew rates up to 100mV/µs. The data output can connect to a microprocessor data bus or connect directly to the microprocessor input port.

Features

Fast Conversion Time: 1.34µs MAX
Built-in Track-and-Hold Function
No Adjustment Required
No External Clock
Single +5V Supply
Easy Interface to Microcontrollers
Internal 2.5V Reference

Pin Layout

Pin Description

Pin Number	Description
1	Vin - Analog Input
2	DB0 - Data Output bit 0
3	DB1 - Data Output bit 1
4	DB2 - Data Output bit 2
5	DB3 - Data Output bit 3
6	WR/RDY - Write Control Input
7	MODE - Module Selection Input
8	RD - Read Input
9	INT - Interrupt Output
10	GND - Ground
11	Vref- - Voltage Reference Lower
12	Vref+ - Voltage Reference Upper
13	CS - Chip Select
14	DB4 - Data Output bit 4
15	DB5 - Data Output bit 5
16	DB6 - Data Output bit 6
17	DB7 - Data Output bit 7
18	OFL - Overflow
19	TP REF OUT - Test Pin Reference Output
20	Vdd - Power Supply

Dimensional Drawing

Technical Data

Datasheet

Maxim Integrated - Datasheet for MAX150

Application Notes