PIC18F1220 18-pin 4kB Microcontroller Datasheet

The Microchip PIC18F1220 Microcontroller is an advanced 18-pin 8-bit PIC Microcontroller with 4 kBytes Flash Program Memory and a Seven Channel 10-bit Accuracy A/D Converter. The microcontroller features an Enhanced Capture/Compare/PWM module with up to Four PWM outputs. The PIC18F1220 has a total of 16 I/O pins available with individual direction control and are suitable for directly driving LEDs.

Features

• High-Performance RISC CPU
  • - Source code compatible with the PIC16 and PIC17 instruction sets
  • - Internal Oscillator to 20 MHz
  • - External Oscillator/Clock Input to 40 MHz
  • - 16-bit wide instructions, 8-bit wide data path
  • - Priority levels for interrupts
  • - 8 x 8 Single Cycle Hardware Multiplier
  • - 4 kBytes Flash Program Memory
  • - 256 Byte RAM Data Memory
  • - 256 Byte EEPROM Data Memory
• Peripheral Features
  • - High current sink/source 25mA/25mA
  • - Three 16-bit timer/counter
  • - One ECCP Module with up to Four PWM Outputs
  • - Addressable USART Module supports RS-485 and RS-232
  • - Seven Channel 10-bit Analog-to-Digital Converter
• Special Microcontroller Features
  • - Power-On Reset
  • - Power-up Timer (PWRT) and Oscillator Start-Up Timer (OST)
  • - 1,000 erase/write cycles Enhanced Flash Program Memory
  • - 1,000,000 typical erase/write cycles EEPROM Data Memory
  • - Watchdog Timer (WDT) with its own On-Chip RC oscillator
  • - Programmable Code Protection
  • - Power Saving SLEEP mode
  • - In-Circuit Debug (ICD)
• CMOS Technology
  • - Low power, high speed CMOS FLASH technology
  • - Fully Static Design
  • - Wide Operating Voltage Range (2.0V to 5.5V)
• I/O and Packages
  • - 16 I/O pins with individual direction control
  • - 18-pin DIP