Hello. Welcome to Futurlec.
The ELECTRONIC COMPONENTS Superstore.
To find the component your looking for, either search by Part Number or visit the relative department.
Linear Technology Releases USB µModule Isolator Offering Data and Power
New Module Offers Protection Against Ground-to-Ground Differentials and Common Mode Transients
Linear Technology has released the LTM2884, a USB µModule®
(micromodule) Isolator that combines USB data communications and USB power, and guards against ground-to-ground
differentials and large common mode transients. The rugged interface and isolation makes the LTM2884 ideal
for systems implementing USB in harsh industrial or medical environments where protection from ground differences
is required. The LTM2884 separates grounds by isolating a pair of USB signal transceivers using internal inductive
signal isolation, providing 2500VRMS isolation plus superior common mode transient rejection of >30kV/µs.
The LTM2884 features an integrated, low EMI, external or bus powered, DC/DC converter that powers the isolated
transceiver and provides up to 2.5W of isolated power for USB peripherals or hub/host controllers. The unique
automatic bus speed detection feature allows the LTM2884 to be used in hub/host/bus isolation applications.
Integrated downstream facing pull-down resistors and upstream facing pull-up resistors are automatically configured
to match the speed of the downstream device, enabling the LTM2884 to monitor and report bus speeds to the host.
With 2500Vrms of galvanic isolation, integrated power and USB 2.0 compatible transceivers, the LTM2884 requires
no external components and is a complete µModule solution for isolated USB communications.
The LTM2884 is suitable for a wide range of applications, including host, hub and peripheral device isolation, as well
as USB inline bus isolation. The ±15kV ESD-protected transceivers operate at USB 2.0 full speed (12Mbps) and low
speed (1.5Mbps). A suspend mode monitors for inactivity and reduces VBUS current to less than 2.0mA. The
integrated DC/DC converter is capable of supplying 2.5W when connected to an external high voltage supply or 1W
when connected to the USB VBUS supply.
The LTM2884 is available in a compact 15mm x 15mm x 5mm surface mount BGA package; all integrated circuits
and passive components are housed in this RoHS-compliant µModule package. The LTM2884 is available in
commercial, industrial and automotive versions, supporting operating temperature ranges from 0°C to 70°C, -40°C to
85°C and -40°C to 105°C respectively.
Key Features of the LTM2883
- UL (Approval Pending) Isolated USB Transceiver: 2500Vrms
- USB 2.0 Full Speed & Low Speed Compatible
- Integrated Isolated DC/DC Converter, Externel or Bus-Powered
- Auto-Configuration of USB Bus Speed
- 2.5W (500mA at 5V) Output Power from External Input Supply
- 1W (200mA at 5V) Output Power from USB Bus Supply (Vbus)
- 3.3V LDO Output Supply Transceiver References Vlo, Vlo2
- High Common-Mode Transient Immunity: 30kV/µs
- ESD: ±15kV HBM on USB Interface Pins
The company's Web site address is www.linear.com.
[Reprinted with kind permission from Linear Technology - Release Date: 21st May, 2014]