Home Components Hardware Boards Books Kits
Futurlec
 Search
Order Status Order Status
 Departments

dotBatteries
dotBreadboards
dotBuzzers
dotCable
dotCamera
dotHardware
dotKeypads
dotMicrophones
dotMultimeters
dotPanel Meters
dotPhotocells
dotPlugs
dotProject Boxes
dotProto Boards
dotRFID Cards
dotSensors
dotCompass
dotDistance
dotFlow
dotFlow Switches
dotFloat Switches
dotGas
dotPIR
dotPressure
dotShock
dotTDS
dotTemperature
dotUltrasonic
dotServo Motors
dotSirens
dotSmart Cards
dotSolar
dotSolder
dotSpeakers
dotStepper Motors
dotTools
 Need Help

dotContact Us
dotNews
dotLatest Products
dotOrdering Information

Hello. Welcome to Futurlec. The ELECTRONIC COMPONENTS Superstore. To find the component your looking for, either search by Part Number or visit the relative department. Need Help.


FLOW SWITCHES


FLOWSWV1 - 1inch Vertical Mount Flow Switch

1" Vertical Mount Flow Switch

Just arrived our new range of flow switches, these flow switches close a switch contact when the water flow reaches a certain level. For this switch, once 6 liters per minute flow is reached, the switch closes. This can then be used to control a valve or indicate a warning on the alarm panel.

This flow switch is suitable for a standard 1" pipe and is designed for a vertical mounted pipe. Suitable for use with drinking water and can also be used in fuel systems. The switch is protected against corrosion with the use of nylon construction for long life and reliable operation. The contact is suitable for switching up to 0.5A with voltages up to 230Vdc. The maximum flow rate for this unit is 30 liters per minute.

Part Code: FLOWSWV1

Pricing


Features

  • Maximum Flow Rate 30 liters/min
  • Maximum Fluid Pressure 2 MPa
  • Minimum Flow Rate for Switch 6 liters/min
  • Fitting for 1" Pipe
  • Suitable for Water and Fuel Systems
  • Contact Rating 0.5A @ 230Vdc
  • Temperature Rating: -30oC to 100oC

Datasheet


Qty
1+
25+
100+

US$ (each)
$15.90
$13.90
$11.90

Order Now for $15.90


FLOWSWH1 - 1-1/4inch Horizontal Mount Flow Switch

1-1/4" Horizontal Mount Flow Switch

Just arrived our new range of flow switches, these flow switches close a switch contact when the water flow reaches a certain level. For this switch, once 15 liters per minute flow is reached, the switch closes. This can then be used to control a valve or indicate a warning on the alarm panel.

This flow switch is suitable for a standard 1-1/4" pipe and is designed for horizontal piping. Suitable for use with drinking water and can also be used in fuel systems. The switch is protected against corrosion with the use of nylon construction for long life and reliable operation. The contact is suitable for switching up to 0.5A with voltages up to 230Vdc. The maximum flow rate for this unit is 30 liters per minute.

Part Code: FLOWSWH1

Pricing


Features

  • Maximum Flow Rate 30 liters/min
  • Maximum Fluid Pressure 2 MPa
  • Minimum Flow Rate for Switch 15 liters/min
  • Fitting for 1¼" Pipe
  • Suitable for Water and Water Treatment Systems
  • Contact Rating 0.5A @ 230Vdc
  • Temperature Rating: -30oC to 100oC

Datasheet


Qty
1+
25+
100+

US$ (each)
$16.90
$14.90
$12.90

Order Now for $16.90


FLOWSW22MM - 22mm Horizontal and Vertical Mount Flow Switch

22mm Horizontal and Vertical Mount Flow Switch

Just arrived our new range of flow switches, these flow switches close a switch contact when the water flow reaches a certain level. For this switch, once 8 liters per minute flow is reached, the switch closes. This can then be used to control a valve or indicate a warning on the alarm panel.

This flow switch is suitable for hose mounting with a 22m diameter caliber for fixing and clamping the hose. The switch can be mounted vertically or horizontally. Suitable for use with drinking water and can also be used in fuel systems. The switch is protected against corrosion with the use of nylon construction for long life and reliable operation. The contact is suitable for switching up to 1A with voltages up to 230Vdc. The maximum flow rate for this unit is 30 liters per minute.

Part Code: FLOWSW22MM

Pricing


Features

  • Maximum Flow Rate 30 liters/min
  • Maximum Fluid Pressure 2 MPa
  • Minimum Flow Rate for Switch 8 liters/min
  • Clamp Fitting for Hose - 22mm Caliber
  • Suitable for Water and Water Treatment Systems
  • Contact Rating 1A @ 230Vdc
  • Temperature Rating: -30oC to +90oC

Datasheet


Qty
1+
25+
100+

US$ (each)
$12.90
$11.90
$10.90

Order Now for $12.90





How To Order  |  What's New  |  Your Account  |  Order Status  |  Help

About Us  |  Contact Us

Copyright Information © 2016, Futurlec